All ecolabels in Europe on building products

	AENOR Medio Ambiente Type I ecolabel system aimed at recognizing environmental friendly products or services. Certification procedure based on auditing and labs test. The program will mark those products with less environmental impacts. It is mainly oriented to consumer products.
	BASF Eco-Efficiency BASF SE has developed a label for products that have been evaluated by an Eco-Efficiency Analysis. The awarding of the label is dependent on demanding requirements: After conclusion of the analysis a third party evaluation (peer review) is requested. Furthermore, publication of the results of the analysis will be undertaken via internet. The label can be carried on for three years. After …
	BASS (Product inventory for the construction industry) BASS is an online tool to help companies to meet regulatory requirements associated with the use of chemicals in the workplace/projects. Since its establishment in 2001, BASS developed to become the industry standard in the construction industry in Norway. Since 2009, BASS includes the auto industry. Development of the BASS is done in close cooperation with business, and provides …
	BASTA The BASTA system focuses on hazardous substances in construction and building products. Products are assessed according their chemical ingredients. Suppliers are responsible for the assessment, and are required to: Declare contents - The supplier must have detailed knowledge of the product´s chemical composition; Provide supporting documentation - The supplier must be able to provide …
	BRE Global Certified Environmental Profile Environmental profiles measure the impacts of a construction material, product or building system throughout its life – not only during its manufacture, but also its use in a building over a typical building lifetime. This includes its extraction, processing, use and maintenance and its eventual disposal. The Environmental Profiles Methodology assesses environmental indicators that reflect …
	Blue Angel The Blue Angel was initiated by the German government and awarded by an independent Jury to products that are environmentally friendlier than others serving the same use. Each label specifies that the product or service focuses on one of four different protection goals: health, climate, water, and resources. The Blue Angel Standard is managed by four entities: The …
	British Allergy Foundation Seal of Approval Endorsement scheme for a wide range of products (from air conditioners and bedding to cars and cleaning products) which specifically restrict or remove high levels of named allergens from the environment.
	Byggvarubedömningen Byggvarubedömningen, or BVB, is a building materials assessment tool. It evaluates, proactively and systematically, the contents of a product and of the production process. BVB also provides a common criteria and an evaluation standard based on seven factors: • Chemical content (declaration of contents) • Input materials (raw materials) • The construction phase • The management …
	Carbon Reduction Label The Carbon Reduction Label is a public commitment that the carbon footprint of a product or service has been measured and certified and the owner of the product or service has committed to reduce that footprint over the following two years. The footprint that has been calculated will have been rigorously measured and be comparable based on the PAS2050 standard and Footprint Expert™. This will …
	Certipur CertiPUR® is a voluntary standard to advance the safety, health and environmental (SHE) performance of flexible polyurethane foams used in bedding and upholstered furniture. The scheme takes into account existing standards and scientific studies related to emanations from foams, product criteria and risk assessments.
	Climatop The aim of climatop is to label the most climate friendly products and services (best-in-class). Similar products of a product family (functional unit) are compared with respect to their environmental emissions. Products that cause CO2-eq emissions that are generally 20% lower, receive the label. Only products that have an environmental balance, which is at least equal or better than the one of …
	Cradle to Cradle Certified(CM) Products Program The Cradle to Cradle Certified(CM) Products Program provides a company with a means to demonstrate efforts in eco-intelligent design. Cradle to Cradle Certification is a third-party sustainability label that requires achievement across multiple attributes: use materials that are safe for human health and the environment through all use phases product and system design for …
	DUBOkeur In 2004 NIBE developed a quality label to compare the environmental friendliness of multiple building products. The DUBOkeur® label is meant to certify the best choices of a product in the fields of environmental and health. In order to do this, the environmental impact of a product in relationship to other products is tested through NIBE’s Twin-model. The most eco-friendly product is …
	Danish Indoor Climate Label The Danish Indoor Climate label is a tool for development and selection of indoor air quality friendly products and better understanding of the impact of products and materials on the indoor air quality in buildings.
	ECOLOGO The ECOLOGO Certification Program was aquired by UL Environment, a division of UL (Underwriters Laboratories) in 2010. ECOLOGO Certification is based on multiattribute, life cycle–based standards. All products certified to an ECOLOGO standard must meet or exceed each of the listed criteria before receiving the mark. ECOLOGO Certification is classified as an ISO (International Organization for …
	ECOproduct ECOproduct is a Norwegian method to choose environmentally friendly building materials and chemicals based on information in an Environmental Product Declaration (EPD) or a safety data sheet. The method has been developed in collaboration with several building industry organizations and contractors in Norway. Each product gets a character for Indoor Environment, Health and Environmental …
	EU Ecolabel A voluntary scheme designed to encourage businesses to market products and services that are kinder to the environment and for European consumers - including public and private purchasers - to easily identify them.
	EU Energy Label By law, the European Community Energy Label must be displayed on all new household products displayed for sale, hire or hire-purchase. The Directive applies to the following types of household appliances, even where these are sold for non-household uses: refrigerators, freezers and their combinations; washing machines, dryers and their combinations; dishwashers; ovens; water heaters and …
	EcoMaterial EcoMaterial certification provides independent, third-party verification that a material was manufactured using strategies aimed at achieving high performance in human and environmental safety and indoor environmental quality, functional characteristics, water efficiency, energy efficiency, raw materials selection. The principle of the standard is an individual approach to each material, …
	Effinature Effinature certification was designed to reverse trend of biodiversity deterioration in the construction sector and raise awareness among town planners about this major issue. Determine the value of the site and the ecological potential of the project. Preserve the existing natural heritage and existing landscape. Control the impacts of the project …
	Ekologicky setrny vyrobek / Environmentally Friendly Product The ecolabel "Ekologicky setrny vyrobek" is the official registered label of The Czech ecolabelling programme (National Programme for Labelling Environmentally Friendly Products). It was launched on 14. April 1994. The programme is administered by CENIA, Czech Environmental Information Agency. The guarantor of the programme is the Ministry of the Environment. In 2004 the programme the scope of the …
	Energy Saving Recommended Energy saving products use less energy and therefore have less of an environmental impact as well as being cheaper to run. The Energy Saving Recommended logo is a quick and easy way to spot the most energy efficient products on the market.
	Environmental Product Declaration The overall goal of an Environmental Product Declaration, EPD, is to provide relevant, verified and comparable information to meet various customer and market needs. The International EPD® System has the ambition to help and support organisations to communicate the environmental performance of their products (goods and services) in a credible and understandable way.
	Environmentally Friendly Label: Croatia The main objective of awarding the Environmental Label is the promotion of products with a reduced adverse environmental impact as compared to other equivalent products. Awarding of the Environmental Label was established to promote development of new (eg. low-waste) technologies, production and consumption of products less adverse to the environment, pollution reduction and a more economical management …
	Forest Stewardship Council (FSC) Chain of Custody Certification The Forest Stewardship Council® (FSC) promotes environmentally appropriate, socially beneficial, and economically viable management of the world's forests. FSC® chain of custody (CoC) tracks FSC certified material through the production process - from the forest to the consumer, including all successive stages of processing, transformation, manufacturing and distribution. Only FSC CoC …
	GEV-Emicode Flooring installation materials labelled with the GEV sign EMICODE EC1 ;very low emission; grant the greatest possible protection against indoor air pollution.
	GREENGUARD Acquired in 2011, GREENGUARD Certification is now provided by UL Environment, a divison of UL (Underwriters Laboratories). GREENGUARD Certification helps manufacturers create -- and helps buyers identify -- interior products and materials that have low chemical emissions into indoor air during product usage. All certified products must meet stringent emissions standards based on established chemical …
	Green Crane: Ukraine Green Crane is a voluntary, multiple specifications based environmental labelling program that operates to international standards and principles. It is awarded to products with relatively less environmental impact compared to similar products, during their entire life cycle, from extracting and collecting the product materials, to the manufacturing, distribution, use and consumption, disposal, …
	Greenspec PASS GreenSpec PASS identifies and endorses green building materials, products and equipment. The PASS label indicates that a product has been selected and endorsed for its superior environmental qualities. PASS is organised and run by architects and specifiers for the benefit of fellow building designers.
	Hungarian Ecolabel / Környezetbarát Termék Védjegy Hungarian national ecolabel developped by the Ministry of Environment in 1994. Goals and procedures meet the requirements of ISO 14024 standard.
	IBU Type III Environmental Declaration (IBU Environmental Product Declaration) This is a Type III declaration for building products. It is based on ISO 14025 as well as ISO 21930 and EN 15804 and declares environmental information on a pass/fail basis. It is meant to identify properties of building products that are relevant to the environmental performance of buildings, and it is based on a Life Cycle Assessment. There are currently 96 declaration holders that together …
	Indoor Air Comfort Eurofins "Indoor Air Comfort" product certification is an innovative tool for showing compliance with low VOC emission requirements from construction products and furniture of all relevant European specifications on two levels: Standard level "Indoor Air Comfort - certified product" shows compliance of product emissions with all legal specifications issued by authorities in the European Union. Higher …
	M1 Emission Classification of Building Materials EMISSION CLASSIFICATION OF BUILDING MATERIALS (M1) The aim of the classification is to enhance the development and use of low-emitting building materials so that material emissions do not increase the requirement for ventilation. The classification presents requirements for the materials used in ordinary work spaces and residences. For air-handling components there is a separate Cleanliness Classification …
	Minergie-ECO MINERGIE ECO is a label for new and refurbished low-energy-consumption buildings that addresses ecological and social requirements. It can be combined with MINERGIE, MINERGIE-P, and MINERGIE-A, which are standards that focus more on energy consumption. Health requirements: high percentage use of daylight instead of electricity sound insulation indoor air …
	National Programme of Environmental Assessment and Ecolabelling in the Slovak Republik (NPEHOV) National environmental labelling scheme - Environmental friendly product- is adapted by Act No.469/2002 on environmental labelling of products as amended by later provisions. Its aim is to promote development of production and consumption of products that have impact on lowering of negative impacts on environment, energy consumption and consumption of raw material and hazardous substances, …
	Nordic Ecolabel or "Swan" Demonstrates that a product is a good environmental choice. The "Swan" symbol, as it is known in Nordic countries, is available for 65 product groups. The Swan checks that products fulfill certain criteria using methods such as samples from independent laboratories, certificates and control visits. Each Nordic country has local offices with the responsibility for criteria development, …
	OK Compost Packaging or products featuring the OK Compost label (based on European standard EN 13432: 2000) are guaranteed as biodegradable & compostable in an industrial composting plant and applies to all components, inks and additives. Any product featuring the OK compost logo complies with the requirements of the EU Packaging Directive ( 94/62/EEC).
	OK Compost HOME OK compost HOME guarantees complete biodegradability in the light of specific requirements, in home garden compost heaps.
	OK biobased OK biobased label offers a comprehensive guarantee about the origin of your products. On a basis of the determined percentage of renewable raw materials (% Bio-based carbon), your product can be certified as one-star-bio-based, two-star-bio-based, three-star-bio-based or four-star-bio-based.
	OK biodegradable SOIL The OK biodegradable SOIL label is a guarantee a product will completely biodegrade in the soil without adversely affecting the environment.
	OK biodegradable WATER Products certified for OK Biodegradable WATER guarantee biodegradation in a natural fresh water environment, and thus substantially contribute to the reduction of waste in rivers, lakes or any natural fresh water. Note that this does not automatically guarantee biodegradation in marine waters.
	Passivhaus PassivHaus is a certification for super-energy efficient buildings meeting the code developed by the PassivHaus Institute in Germany, and administered in Canada, Germany, UK and US. A Passive House is a very well-insulated, virtually air-tight building that is primarily heated by passive solar gain and by internal gains from people, electrical equipment, etc. Energy losses are minimized. …
	Programme for the Endorsement of Forest Certification (PEFC) schemes The Programme for the Endorsement of Forest Certification (PEFC) is an international non-profit, non-governmental organization dedicated to promoting Sustainable Forest Management (SFM) through independent third-party certification. It works throughout the entire forest supply chain to promote good practice in the forest and to ensure that timber and non-timber forest products are produced with …
	SCS FloorScore® FloorScore® is a certification for commercial and residential hard-surface flooring products and flooring adhesives. Developed in conjunction with the Resilient Floor Covering Institute, products must comply with indoor air quality and VOC emission requirements set by California Section 01350, and meet rigorous quality management standards in manufacturing. Certification and documentation help …
	SCS Recycled Content SCS Recycled Content Certification recognizes products made either in whole or part from recycled waste material in place of virgin raw materials. The percentage of post-consumer or pre-consumer recycled content is reported in compliance with Federal Trade Commission guidelines and ISO standards. The certification process includes company auditing and supply chain verification. Certification and …
	SEE What You Are Buying Into SEE What You Are Buying Into is a labelling scheme for businesses that are open and honest about their Social, Environmental and Ethical (SEE) policies and practices. To use the SEE Logo, a company completes the SEE Questionnaire, developed in collaboration with leading NGOs. Businesses guarantee the accuracy and veracity of their responses and publish them on the SEE What You Are Buying …
	SMaRT Consensus Sustainable Product Standards Sustainable Materials Rating Technology or SMaRT, is the consensus sustainable products standard and label for building products, fabric, apparel, textile & flooring, covering over 80% of the world’s products with environmental, social, & economic criteria. It is the result of 17 years of standardization with six national votes of consensus approvals involving thousands of professionals. SMaRT …
	Singapore Green Label Scheme (SGLS) The Singapore Green Labeling Scheme (SGLS) aims to help the public identify environment-friendly products that meet certain eco-standards specified by the scheme and seeks to encourage the level of eco-consumerism in Singapore as well as to identify the growing demand for greener products in the market. The scheme hopes to encourage manufacturers to design and manufacture with the environment in …
	SundaHus Miljödata SundaHus Environmental Data is an environmental assessment of products used in construction and buildings. The core of the system is a database of substances, materials and products. The product assessment is based on the provider's documentation of the product together with the rules of the Swedish Chemical Inspectorate's PRIO criteria and EU REACH Directives. The assessment is …
	Sustainable Forestry Initiative (SFI) The SFI program has on-product labels to help customers and consumers identify exactly what they are buying: three SFI chain of custody labels and one SFI certified sourcing label. SFI chain of custody labels allow the use of fiber from certified forests, certified sourcing, and post-consumer recycled material. All of these terms are defined in the SFI Definitions (Section 13 of …
	SustentaX SustentaX is a Brazilian ecolabel that assists consumers to identify sustainable products, materials, equipments and services. Products with the SustentaX Seal are evaluated for their quality and human safety. Manufacturers must prove their social, environmental and marketing responsibilities. The independent verification process for the SustentaX Seal is based on ISO 14024.
	Vitality Leaf "Vitality Leaf" was developed by the Russian NGO Non-profit partnership Ecological Union in 2001, is officially registered, open and clear for all potential participants. Member of the Global Ecolabelling Network since 2007. Certified member of the Global Ecolabelling Network’s Internationally Coordinated Ecolabelling System (GENICES) since 2011. Criteria for certification …
	Waterwise Marque The Marque is awarded annually to products which reduce water wastage or raise the awareness of water efficiency in the U.K.
	WindMade Windmade™ is a consumer label identifying products and companies using wind energy. WindMade™ is dedicated to increasing corporate investments in wind power by informing consumers about companies’ use of wind energy, and increasing demand for products that embrace this clean and renewable energy source. To use the WindMade label for their communications or products, WindMade members …
	eco-INSTITUT-Label With substantial emission and toxicological testing living up to more than just the legal specifications, eco-Institut supplies clients a reliable and significant label for building products and textiles without any health hazards.
	level The level® brand identifies that a furniture product has been evaluated to the multi-attribute ANSI/BIFMA e3 Furniture Sustainability Standard by an independent, third-party certifier. level has three conformance thresholds. Products can be awarded a level 1, level 2, or level 3 conformance mark based on the combined score achieved in their sustainability evaluation. level® was created …
	natureplus Natureplus is an international label of quality for sustainable building and accommodation products, tested for health, environmental-friendliness and functionality. The label’s primary aim is to provide consumers as well as architects, tradesmen, building companies and all those involved in construction, with a reliable orientation aid towards sustainable products i.e. environmentally-friendly …

All ecolabels in Europe on building products

Keep up to date | News, press

Help build this site | Submit, suggest