All ecolabels in United States on building products

	B Corporation B Corporations are a new type of corporation which uses the power of business to solve social and environmental problems. B Corporations are unlike traditional responsible businesses because they meet comprehensive and transparent social and environmental performance standards, institutionalize stakeholder interests, and build collective voice through the power of a unifying brand. B Corporations' …
	BASF Eco-Efficiency BASF SE has developed a label for products that have been evaluated by an Eco-Efficiency Analysis. The awarding of the label is dependent on demanding requirements: After conclusion of the analysis a third party evaluation (peer review) is requested. Furthermore, publication of the results of the analysis will be undertaken via internet. The label can be carried on for three years. After …
	BRE Global Certified Environmental Profile Environmental profiles measure the impacts of a construction material, product or building system throughout its life – not only during its manufacture, but also its use in a building over a typical building lifetime. This includes its extraction, processing, use and maintenance and its eventual disposal. The Environmental Profiles Methodology assesses environmental indicators that reflect …
	Blue Angel The Blue Angel was initiated by the German government and awarded by an independent Jury to products that are environmentally friendlier than others serving the same use. Each label specifies that the product or service focuses on one of four different protection goals: health, climate, water, and resources. The Blue Angel Standard is managed by four entities: The …
	Burn Wise EPA Burn Wise is a partnership program of the U.S. Environmental Protection Agency that emphasizes the importance of burning the right wood, the right way, in the right wood-burning appliance to protect your home, health, and the air we breathe. The Burnwise program covers three types of heaters: Woodstoves, Fireplaces and Hydronic Heaters (Outdoor Wood Boilers). "EPA qualified" units …
	CHPS - Collaborative for High Performance Schools CHPS is leading a national movement to improve student performance and the entire educational experience by building the best possible schools. CHPS develops tools that help make schools energy, water and material efficient, well-lit, thermally comfortable, acoustically sound, safe, healthy and easy to operate.Resources offered by CHPS include a six-volume best practices manual, training and conferences, …
	CRI Green Label In 1992, the Carpet and Rug Institute (CRI) launched its Green Label program to test carpet, cushions and adhesives to help specifiers identify products with very low emissions of VOCs. CRI has recently launched its next series of improvements called Green Label Plus for carpet and adhesives. This enhanced program sets an even higher standard for indoor air quality and ensures that customers …
	Carbon Neutral Certification A Carbon Neutral Certification is a label given to businesses that offset their Scope 1 and 2 carbon footprint. Verus Carbon Neutral first calculates the carbon footprint of a business wanting to be Carbon Neutral Certified. They then offset the carbon footprint by retiring carbon credits. Offsetting allows businesses to mitigate the greenhouse gases they are unable eliminate through energy efficiencies …
	Carbon Reduction Label The Carbon Reduction Label is a public commitment that the carbon footprint of a product or service has been measured and certified and the owner of the product or service has committed to reduce that footprint over the following two years. The footprint that has been calculated will have been rigorously measured and be comparable based on the PAS2050 standard and Footprint Expert™. This will …
	CarbonFree® Certified The CarbonFree® Product Certification label is aimed at increasing awareness of product emissions and recognizing companies that are compensating for their carbon footprint. The label was created in response to the growing market for eco-friendly products and consumer demand for transparent, credible and readily accessible information at the point of purchase. By determining a product’s carbon …
	Certified Green Dealer The Certified Green Dealer® Program is a program for certifying US green lumber and building material dealerships. The Program consists of a distance-learning and testing system that certifies that lumber dealer personnel are trained in the basics of green building science and green product knowledge. The Program is not affiliated with any particular national standards-setting organization, …
	Cradle to Cradle Certified(CM) Products Program The Cradle to Cradle Certified(CM) Products Program provides a company with a means to demonstrate efforts in eco-intelligent design. Cradle to Cradle Certification is a third-party sustainability label that requires achievement across multiple attributes: use materials that are safe for human health and the environment through all use phases product and system design for …
	DUBOkeur In 2004 NIBE developed a quality label to compare the environmental friendliness of multiple building products. The DUBOkeur® label is meant to certify the best choices of a product in the fields of environmental and health. In order to do this, the environmental impact of a product in relationship to other products is tested through NIBE’s Twin-model. The most eco-friendly product is …
	Danish Indoor Climate Label The Danish Indoor Climate label is a tool for development and selection of indoor air quality friendly products and better understanding of the impact of products and materials on the indoor air quality in buildings.
	Declare The goal of Declare is to position the building product sector within a transparent materials economy. Declare is an ingredients label for building products, paired with an online database. It allows manufacturers to demonstrate their leadership in the marketplace and it provides consumers with honest information for product selection. All products are eligible for inclusion, regardless …
	Degree of Green® The Degree of Green® rating program aims at helping consumers by rating products and explaining those ratings in clear language. At the core of Degree of Green® are data sheets that detail the environmental, health and sustainability attributes of various products. A top rating of 4 goes to products that have: the least adverse effects on human health the highest …
	ECOLOGO The ECOLOGO Certification Program was aquired by UL Environment, a division of UL (Underwriters Laboratories) in 2010. ECOLOGO Certification is based on multiattribute, life cycle–based standards. All products certified to an ECOLOGO standard must meet or exceed each of the listed criteria before receiving the mark. ECOLOGO Certification is classified as an ISO (International Organization for …
	ENERGY STAR: USA ENERGY STAR is a voluntary government-backed program dedicated to helping individuals protect the environment through energy efficiency. The ENERGY STAR mark is the national symbol for energy efficiency, making it easy for consumers and businesses to identify high-quality, energy-efficient products, homes, and commercial and industrial buildings. ENERGY STAR distinguishes what is efficient/better …
	EU Ecolabel A voluntary scheme designed to encourage businesses to market products and services that are kinder to the environment and for European consumers - including public and private purchasers - to easily identify them.
	Earthsure The purpose of the Earth sure program is to provide comprehensive environmental data to purchasers (business and individuals) so that the power of the market can moves the economy towards overall environmental improvement. Earth Sure environmental product declarations (EPDs) can cover a portion of the life cycle of a product or an entire life cycle. Products in any sector can obtain EPDs …
	Environmentally Preferable Product (EPP) Downstream The Composite Panel Association’s (CPA) Environmentally Preferable Panel (EPP) Downstream Program is an easy way for consumers to identify environmentally responsible composite wood products. Products carrying the EPP Downstream logo were manufactured by a company that has demonstrated their environmental commitment by purchasing at least 50% CPA EPP certified composite wood products. …
	Forest Stewardship Council (FSC) Chain of Custody Certification The Forest Stewardship Council® (FSC) promotes environmentally appropriate, socially beneficial, and economically viable management of the world's forests. FSC® chain of custody (CoC) tracks FSC certified material through the production process - from the forest to the consumer, including all successive stages of processing, transformation, manufacturing and distribution. Only FSC CoC …
	GREENGUARD Acquired in 2011, GREENGUARD Certification is now provided by UL Environment, a divison of UL (Underwriters Laboratories). GREENGUARD Certification helps manufacturers create -- and helps buyers identify -- interior products and materials that have low chemical emissions into indoor air during product usage. All certified products must meet stringent emissions standards based on established chemical …
	Global GreenTag Certified Global Green Tag® is a third party, green product rating and certification system, underpinned by scientific and Life Cycle Assessment (LCA) processes. The program assesses products against worst case business as usual products in the same functional category and with the same functional purpose, based on the following impacts / benefits: product synergy; greenhouse emission …
	Green Advantage Certification Green Advantage is a non-profit organization committed to delivering an exemplary green building certification for and with construction personnel and building-related practitioners. It promotes green building education and stimulates the use of green building best practices by producing certification standards and assessments for building-related practitioners and organizations. Their …
	Green Products Standard Green Products Standard helps consumers better understand the growing number of green and eco-friendly products in the marketplace. Their standards take a comprehensive life-cycle view of every product and provide a ranking of degree of 'greenness' explained with a simple symbol and a report.
	Green Seal An independent non-profit founded in 1989, Green Seal certifies thousands of products and services that meet science-based environmental standards that are credible and transparent. Green Seal utilizes a life-cycle approach to ensure tangible reductions in the whole environmental footprint. They are ANSI-accredited and meet ISO and GEN requirements. Products only earn Green Seal certification after …
	Green Tick Independent sustainability certification of products, services, and corporations based on a life-cycle audit of performance against the Green Tick Sustainability Standards. GreenTick also certifies for Climate-Friendly, Natural, GE-Free, Organic, and Fair Trader brands.
	GreenCircle GreenCircle Certified, LLC provides third-party certification of sustainable aspects of products and manufacturing operations. Manufacturers, suppliers, regulators, and consumers can be assured that products labeled with the GreenCircle Certified mark have been thoroughly assessed and their claim verified. By issuing a GreenCircle Certification, GreenCircle Certified demonstrates that it …
	GreenSure - Sherwin Williams GreenSure is a designation applied to a line of Shrewin Williams paints and coating products that indicates that they were designed and manufactured taking steps to reduce environmental impact and to meet or exceed the most stringent regulatory requirements. Requirements for architectural products include: VOC limits, aromatic content limits, chemical component restrictions (i.e. excluded …
	Greener Product Certification Seal The Greener Product Certification Seal demonstrates that a product has been evaluated against the LEED, LEED for Homes and NAHB green building standards using internationally recognized third-party certification organizations, laboratory test results and/or other supporting documentation. Products in twenty four building products categories are evaluated using seven environmental qualifiers …
	Home Depot Eco Options Eco Options labeled products have less of an impact on the environment than conventional products and provide a positive environmental change through their use.
	IBU Type III Environmental Declaration (IBU Environmental Product Declaration) This is a Type III declaration for building products. It is based on ISO 14025 as well as ISO 21930 and EN 15804 and declares environmental information on a pass/fail basis. It is meant to identify properties of building products that are relevant to the environmental performance of buildings, and it is based on a Life Cycle Assessment. There are currently 96 declaration holders that together …
	Indoor airPLUS EPA created Indoor airPLUS to help builders meet the growing consumer preference for homes with improved indoor air quality. EPA developed additional construction specifications to help improve indoor air quality in new homes. Construction specifications include the careful selection of and installation of moisture control systems; heating, ventilating, and air-conditioning systems; combustion-venting …
	M1 Emission Classification of Building Materials EMISSION CLASSIFICATION OF BUILDING MATERIALS (M1) The aim of the classification is to enhance the development and use of low-emitting building materials so that material emissions do not increase the requirement for ventilation. The classification presents requirements for the materials used in ordinary work spaces and residences. For air-handling components there is a separate Cleanliness Classification …
	MAS Certified Green MAS Certified Green is a registered trademark to delineate low VOC emitting products in the marketplace. Purchasers and Specifiers of those products are ensured that they can earn credits in sustainability programs like USGBC-LEED, California Department of Public Health, and the Collaborative for High Performance Schools program. Only products that pass stringent MAS testing criteria can display …
	NAHB Certified Green Professional The National Association of Home Builders’ (NAHB) Certified Green Professional™ and Master Certified Green Professional (Master CGP) designations recognizes builders, remodelers and other industry professionals who incorporate green building principles into homes. The basic designation requires 24 hours of NAHB-approved training, and additional continuing education every three years. …
	NAHB Green National Green Building Certification is a green residential standard from the National Association of Home Builders (NAHB) and approved by the American National Standards Institute. It's applicable for new and remodeled single-family and multifamily homes as well as residential subdivisions. Projects can be scored on a point basis to the Bronze, Silver, Gold or Emerald level, each one …
	NSF Sustainability Certified Product The NSF Sustainability Certified mark is available to products that meet conformity assessment to a NSF/ANSI or other national or international sustainable product standards. Use of the NSF Sustainability Certified Mark is granted once certification has been completed through product evaluation, conformity assessment against standards and protocols, and production systems review. The …
	NSF/ANSI 332 Sustainability Assessment for Resilient Floor Coverings This standard provides a a framework by which to evaluate and certify sustainability of Resilient Flooring products across their entire product life cycle. NSF/ANSI 332 employs a point system to evaluate resilient flooring against established prerequisite requirements, performance criteria and quantifiable metrics in the areas of product design, product manufacturing, long-term value, end-of-life …
	NSF/ANSI 336: Sustainability Assessment for Commercial Furnishings Fabric This NSF ecolabel addresses the environmental, economic and social aspects of furnishing fabric products, including woven, non-woven, bonded and knitted fabrics used for upholstery (e.g. office and hotel furniture), vertical (e.g. drapery or panel systems fabric) and decorative top of bed applications (e.g. bedspreads) commonly used in institutional, hospitality and office settings. The standard …
	NSF/ANSI 342 Sustainability Assessment for Wallcovering Products This is a standard by which to evaluate and certify sustainability of wallcovering products across their entire product life cycle. Based on life-cycle assessment principles, NSF/ANSI 342 employs a point system to evaluate wallcovering products against established requirements, performance criteria and quantifiable metrics in the areas of product design, product manufacturing, long-term value, end-of-life …
	Passivhaus PassivHaus is a certification for super-energy efficient buildings meeting the code developed by the PassivHaus Institute in Germany, and administered in Canada, Germany, UK and US. A Passive House is a very well-insulated, virtually air-tight building that is primarily heated by passive solar gain and by internal gains from people, electrical equipment, etc. Energy losses are minimized. …
	Programme for the Endorsement of Forest Certification (PEFC) schemes The Programme for the Endorsement of Forest Certification (PEFC) is an international non-profit, non-governmental organization dedicated to promoting Sustainable Forest Management (SFM) through independent third-party certification. It works throughout the entire forest supply chain to promote good practice in the forest and to ensure that timber and non-timber forest products are produced with …
	SCS FloorScore® FloorScore® is a certification for commercial and residential hard-surface flooring products and flooring adhesives. Developed in conjunction with the Resilient Floor Covering Institute, products must comply with indoor air quality and VOC emission requirements set by California Section 01350, and meet rigorous quality management standards in manufacturing. Certification and documentation help …
	SCS Indoor Advantage SCS Indoor Advantage certifications demonstrate that products meet indoor air quality standards pertaining to emissions that may be harmful to human health and the environment. SCS Indoor Advantage applies to furnishings and qualifies for the BIFMA furniture emissions standard, while SCS Indoor Advantage Gold certification applies to furniture plus a broader range of interior building materials …
	SCS Recycled Content SCS Recycled Content Certification recognizes products made either in whole or part from recycled waste material in place of virgin raw materials. The percentage of post-consumer or pre-consumer recycled content is reported in compliance with Federal Trade Commission guidelines and ISO standards. The certification process includes company auditing and supply chain verification. Certification and …
	SCS Sustainable Choice Sustainable Choice certification ensures that carpet products meet measurable environmental performance and social responsibility criteria for continuous improvement. The certification is based on the internationally recognized standard NSF/ANSI 140 Sustainable Carpet Assessment Standard (2010). Sustainable Choice is awarded on three certification levels (Silver; Gold; Platinum) through points achieved …
	SMaRT Consensus Sustainable Product Standards Sustainable Materials Rating Technology or SMaRT, is the consensus sustainable products standard and label for building products, fabric, apparel, textile & flooring, covering over 80% of the world’s products with environmental, social, & economic criteria. It is the result of 17 years of standardization with six national votes of consensus approvals involving thousands of professionals. SMaRT …
	Sourcemap Sourcemap.com supports sustainable decision-making through our platform for supply chain transparency, where producers share detailed information about their processes with their buyers and their buyers’ buyers, all the way to the end consumer. A Sourcemap ecolabel points to information on a product's components and their origins, as well as optional environmental and social footprints. The information …
	Sustainable Forestry Initiative (SFI) The SFI program has on-product labels to help customers and consumers identify exactly what they are buying: three SFI chain of custody labels and one SFI certified sourcing label. SFI chain of custody labels allow the use of fiber from certified forests, certified sourcing, and post-consumer recycled material. All of these terms are defined in the SFI Definitions (Section 13 of …
	SustentaX SustentaX is a Brazilian ecolabel that assists consumers to identify sustainable products, materials, equipments and services. Products with the SustentaX Seal are evaluated for their quality and human safety. Manufacturers must prove their social, environmental and marketing responsibilities. The independent verification process for the SustentaX Seal is based on ISO 14024.
	TRA Certification – Green Modular and Manufactured Homes TRA certifies manufacturers of Modular and Manufactured Homes using the ANSI ICC 700-2008 National Green Building Standard. The label indicates compliance with all aspects of the standard excluding site factors. The TRA Green Certification program includes a directory of suppliers that supply the manufacturer with construction material, electrical, cooling, heating, plumbing, floors, etc; …
	TRA Certification – Green Recreational Vehicles (RVs) TRA certifies manufacturers of components for Recreational Vehicles (RVs) using the ANSI ICC 700-2008 National Green Building Standard. The TRA Green Certification program includes a directory of suppliers that supply the manufacturer with construction material, electrical, cooling, heating, plumbing, floors, etc; and highlights those suppliers who have been Verified Green.
	U.S. EPA Safer Choice The U.S. EPA Safer Choice program (previously U.S. EPA Design for the Environment Program) advances EPA's mission to protect human health and the environment. The program uses EPA's chemical knowledge and resources to carefully evaluate products and to label only those that have met the program's leadership standard. By allowing use of the logo on products, EPA empowers consumers and commercial …
	UL Energy Efficiency Verified UL (Underwriters Laboratory) provides a service for the verification of products that meet the appropriate requirements for energy efficiency and which are also Listed or Recognized by UL. Through UL's Energy Efficiency Certification Program, manufacturers can show consumers, competitors, and regulators that their products are helping lower energy demand. Products must comply with the appropriate …
	UL Environment Multi-Attribute Certification Environmental Product Certifications tell the story of a product’s environmental performance throughout its lifecycle, enabling purchasers to identify holistically greener products and meet their sustainability goals. These voluntary, multi-attribute, lifecycle-based environmental certifications indicate that a product has undergone rigorous scientific testing, exhaustive auditing, or both, to …
	UL Environmental Claim Validation Environmental claim validations are agents of assurance, providing independent proof that products are exactly as they claim to be. Underwriters Laboratory (UL)'s Environmental Claims Validation (ECV) service and label, tests a manufacturer’s product and validates that the environmental claims they make in their marketing and packaging materials are factual. Claims validated include: recycled …
	USDA Certified BioBased USDA BioBased is a federally administered and run label that is based on the BioPreferred program created by the 2002 US Farm Bill to increase the purchase and use of biobased products. The 2008 Farm Bill (Food Conservation and Energy Act of 2008) expanded the existing preferred purchasing program for federal sector and reauthorized the voluntary labeling program for the broad scale consumer marketing …
	WaterSense Products bearing the WaterSense label are generally 20% more water-efficient than similar products in the marketplace and must be independently certified before qualifying for the label.
	level The level® brand identifies that a furniture product has been evaluated to the multi-attribute ANSI/BIFMA e3 Furniture Sustainability Standard by an independent, third-party certifier. level has three conformance thresholds. Products can be awarded a level 1, level 2, or level 3 conformance mark based on the combined score achieved in their sustainability evaluation. level® was created …

All ecolabels in United States on building products

Keep up to date | News, press